Abstract
This defensive technical commons discloses a generalized, modular, non-flammable family of aqueous zinc–iron chloride hybrid redox flow batteries spanning 12 VDC to 48 VDC nominal direct-current buses, arbitrary active electrode geometries and flow-frame dimensions, varied planar and porous electrode substrates, modular multi-stack configurations, and scalable energy capacities ranging from compact off-grid modules (such as a 10.25 kWh unit in a 91.5 L footprint at 112.04 Wh/L) to larger stationary or mobile installations. Rather than restricting the design to a single voltage, cell size, power rating, or narrow chemical recipe, the disclosed commons unifies six interlocking technical pillars: Scalable Voltage, Cell Geometry & Capacity Topologies: Series, parallel, and series- parallel stack configurations across 12 VDC, 24 VDC, 36 VDC, and 48 VDC (and custom modular voltages), arbitrary cell active areas and flow-frame sizes, scalable power delivery, and scalable electrolyte reservoir volumes proportioned to electron-transfer stoichiometry. Broad Electrode, Porous Substrate & Bipolar Material Coverage: Zinc sheets, roughened or abraded zinc sheets, zinc-plated carbon felts, zinc-plated conductive foams, carbon felt, other conductive carbons, graphites, carbon cloths, felts, and foams, conductive carbon-filled polymers (such as carbon-filled HDPE), and isolated current collectors (such as copper). Defensive Technical Commons — Zinc–Iron Chloride Flow Battery Page 1 of 12 Water-in-Salt (WiSE) & Co-Salt Solubility-Enhanced Electrolytes: High-molarity zinc chloride and iron(II) chloride solutions—including up to 6 M ZnCl2 paired with 1.5 M KCl (plus boundary/crystal-refining additives) on the negative side, and up to 6 M iron(II) chloride solubilized via 1.5 M NH4Cl (ammonium chloride) on the positive side—to increase volumetric energy and power density, boost salt solubility, preserve high ionic and charge transport, and suppress zinc dendrite formation. Expanded Negative & Positive Electrolyte Additive Systems: Macromolecular water- displacing boundary modifiers, leveling/brightening and crystal-habit directors (including polyvinyl alcohol and thiourea, such as at a 3:1 mass ratio, 1.0 g/L PVA with 0.38 g/L thiourea, or 0.1 g/100 mL PVA with 0.038 g/100 mL thiourea), supporting chlorides, trace inorganic/metallic modifiers, and positive-loop solubility, anti-hydrolysis, and complexation agents. Chloride-Selective Membranes & Dual CEM/AEM Gel-Interlayer Assemblies: Chloride-selective anion exchange membranes (AEMs) shuttling Cl− ions to balance charge, as well as dual-membrane assemblies placing a Cation Exchange Membrane (CEM) facing the zinc anode and an Anion Exchange Membrane (AEM) facing the iron cathode with a potassium chloride–xanthan gum gel polymerized with citric acid and heated for approximately 2 to 4 hours between the two membranes to block iron crossover and negative- side poisoning over long cycle life. Serviceable Filter-Press Construction, Shunt-Mitigating Fluidics & Stripping Control: Thermally fused bipolar assemblies, chemically compatible spacers and gaskets, pre- conditioned membranes, multi-channel or low-shear pumping that reduces or eliminates shunt currents, periodic or daily stripping resets, and peelable or modularly serviceable enclosures
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.
Recommended Citation
Middleton, Peter James Mr, "Universal Modular Aqueous Zinc–Iron Chloride Hybrid Redox Flow Battery Architecture", Technical Disclosure Commons, ()
https://www.tdcommons.org/dpubs_series/13257