Abstract
In a Segment Routing over IPv6 (SRv6) service deployment, a service segment identifier (SID) is derived from a locator of a single flexible algorithm (Flex-Algo) topology. When that Flex-Algo fails, the service SID is unreachable and traffic is lost even though another Flex-Algo may still reach the endpoint. A Border Gateway Protocol (BGP) extension is described that associates one SRv6 service with several Flex-Algos. With SRv6 transposition enabled, the egress node advertises a single function value in the label field of the network layer reachability information and, in a new service sub-TLV, the locator of each Flex-Algo together with a priority. The ingress node derives one service SID per locator, pre-programs them all, forwards to the highest-priority SID, and switches to the next SID when the primary locator becomes unreachable. Equal priorities enable load balancing. No separate function or full SID is advertised per Flex-Algo, so control-plane state is reduced.
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.
Recommended Citation
Anonymous, "Method and System for Multi-Flex-Algo SRv6 Service Protection and Load Balancing Using a Common Function SID", Technical Disclosure Commons, (November 16, 2026)
https://www.tdcommons.org/dpubs_series/13103