Abstract
Existing MPLS operations, administration, and maintenance (OAM) identifiers, including the Source and Destination Identifier TLVs, the Static Pseudowire and Static LSP sub-TLVs, and the BFD MEP-ID TLVs, carry a 32-bit Node_ID and have no field for a 128-bit IPv6 address. On IPv6-only nodes, a pseudowire cannot always be resolved from its label alone, target FEC stack validation cannot be completed, source filtering of on-demand connectivity verification messages cannot be applied, and BFD endpoints cannot be identified. This disclosure defines IPv6 counterparts of each identifier: Static Pseudowire and Static LSP sub-TLVs that carry 16-octet source and destination IPv6 node addresses, Source and Destination Identifier TLVs that carry a Global_ID and an IPv6 node address, and LSP, pseudowire, and section MEP-ID TLVs that carry an IPv6 node identifier. A requester inserts these in LSP Ping, traceroute, on-demand connectivity verification, and BFD messages, enabling native IPv6 endpoint identification without implementation-specific address translation.
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.
Recommended Citation
Anonymous, "Mechanism for Operations, Administration, and Maintenance on Label Switched Paths over IPv6 Tunnels", Technical Disclosure Commons, (November 16, 2026)
https://www.tdcommons.org/dpubs_series/13099