Abstract
A system and a method extract water from air with simultaneous generation of heat. In an essentially U-shaped channel, incoming air passes the inlet side of a counterflow recuperative heat exchanger, a cooling unit in the turn zone, where primary water condenses, and the return side of the heat exchanger, where sprayed liquid evaporates and recovers sensible and latent energy. A heat source with spray then generates a saturated vapour mixture, which is condensed in a condensation unit against a cooling medium, giving further water and heat. A further unit can produce process cooling by evaporative cooling. The energy supplied is used in successive steps. The cooling unit and the heat source can be the two sides of a heat pump, and a control unit selects the heat exchangers and operating mode according to temperature, including cold-weather operation.
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.
Recommended Citation
Lius, Vesa Olavi, "SYSTEM AND METHOD FOR SEQUENTIAL THERMODYNAMIC AIR TREATMENT FOR SIMULTANEOUS GENERATION OF WATER, HEAT AND COOLING", Technical Disclosure Commons, (November 16, 2026)
https://www.tdcommons.org/dpubs_series/13097