Abstract
A decoupled, dual-chemistry energy storage and wide-bandgap (WBG) power routing architecture is disclosed for autonomous, artificial intelligence-controlled bipedal humanoid robots and aerial/terrestrial drone vehicles. The system separates gravimetric energy capacity from instantaneous transient power delivery by coupling a primary high-energy-density storage subsystem in parallel with an asymmetric electrochemical transient buffer via a monolithic, software-defined WBG power routing network. High-bandwidth current and voltage sensors monitor the primary distribution bus at sampling rates of 2 MHz or greater to detect high-torque actuator or propulsion surges (high di/dt). Upon crossing a predefined current threshold, Gallium Nitride (GaN) field-effect transistors switching at 100 kHz to 200+ kHz execute a sub-microsecond gate-interlocking handoff, isolating the primary energy core to a steady-state discharge rate (≤ 1C) while routing multi-kilowatt transient peak loads (10C to 50C+) exclusively from the transient buffer (such as Lithium-Ion Capacitors or Lithium Titanate Oxide cells). Concurrently, Silicon Carbide (SiC) Schottky barrier diodes commute backward-surging regenerative braking energy directly into the transient buffer with near-zero reverse-recovery loss (Qrr ≈ 0), eliminating thermal throttling, lithium plating, and cathode micro-cracking in the primary energy cells.
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.
Recommended Citation
Middleton, Peter James Mr, "Asymmetric Dual-Chemistry Energy Storage System with Wide-Bandgap Semiconductor Current Modulation for Autonomous Bipedal Robotics and Aerial Vehicles", Technical Disclosure Commons, (November 16, 2026)
https://www.tdcommons.org/dpubs_series/13085