Abstract
This article describes a set of measurement technologies that make it possible to locate, on board a moving tamping machine, the longitudinal position of the sleepers and of their rail fastenings when these are completely covered by ballast. The article also describes how the control unit of the tamping machine uses these measurements to control the travel, the stopping and the work cycle of the tamping units, both in cyclic machines and in continuous-action machines in which the tamping units are mounted on a satellite. The technologies described are: eddy-current inductive sensors; pulse induction sensors; magnetometers and gradiometers, passive or with active excitation; ground-penetrating radar; capacitive sensors; mechanical probes and force or pressure measurements on the tamping tines; rail vibration and deflection sensors; acoustic and ultrasonic sensors; vision systems, LiDAR and passive thermography; active thermography with preliminary heating; air-jet sensors. For each technology, the article indicates the physical principle, the arrangement on the machine, the signal processing, the criterion by which a sleeper is recognised and the way in which its coordinate is determined. The way in which the detections are converted into commands for the machine is described, for all technologies, in a dedicated section. The article also describes configurations combining several technologies, the control sequences of the tamping machine and the display, on a screen on board the machine or at a remote-control station, of the position of the detected sleepers and of the position of the tamping tines along the track and vertically, as well as the indication on the ballast of the position of the detected sleepers and of the tamping tines by means of a direct or indirect light source, such as a laser, or by paint marking.
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 License.
Recommended Citation
"Detection of ballast-covered sleepers and rail fastenings and control of the tamping machine: measurement technologies and control modes", Technical Disclosure Commons, ()
https://www.tdcommons.org/dpubs_series/13027